denable

Enables action points

Format: 

Enables some action points

denable action-point-list [ –block number-list]

Enables all disabled action points in the current focus

denable –a

Arguments: 

action-point-list

The identifiers of the action points being enabled.

–a

Enables all action points.

–block number-list

If you set a breakpoint on a line that is ambiguous, this option names which instances to enable. Use the dactions command to obtain a list of these numbers.

Description: 

The denable command reactivates action points that you previously disabled with the ddisable command. The –a option enables all action points in the current focus.

If you did not save the ID values of disabled action points, use dactions to obtain a list of this information.

If you do not indicate a focus, the default focus is the process of interest (POI).

Command alias: 

 

Alias	Definition	Description
en	denable	Enables action points

Examples: 

denable 3 4

Enables two previously identified action points.

dfocus {p1 p2} denable –a

Enables all action points associated with processes 1 and 2. This command does not affect settings associated with other processes.

en –a

Enables all action points associated with the current focus.

f a en –a

Enables all actions points in all processes.

en 1 -block 3 4

Enables the action points associated with blocks 3 and 4. That is, one logical action point can map to more than one actual action point if you set the action point at an ambiguous location.

denable 1 2 -block 3 4

Enables the action points associated with blocks 3 and 4 in action points 1 and 2.